Madison Motorsports
Tuning Help - Printable Version

+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Technical Discussion (https://forum.mmsports.org/forumdisplay.php?fid=11)
+--- Thread: Tuning Help (/showthread.php?tid=2704)



Tuning Help - JustinG - 08-29-2005

Anyone wanna take a wack at helping me tune my car....Im using MegaSquirt. Most tuning can be done with a knowledge of VE tables. Any help would be appreciated.


- BLINGMW - 08-29-2005

suite! I'd love to figure out some Megasquirt. If I wern't so lazy. Tell us how it goes


- KPWSerpiente - 08-30-2005

I thought you had a wideband?

If so I'm assuming the afr table is in use...and if you have that set up correctly it should be adjusting the VE table.

Set up the AFR table the way you want it. Stoichemetric at idle and low load low throttle situations...richer at higher throttle, higher load, higher throttle situations. Then adjust the VE table so that there is no wideband correction of it.

Once you have that set up you can start tuning for acceleration.

-T


- PDenbigh - 08-30-2005

Are you using Megatweak? If not, shoot for that first. Then, look for an A/F of 11-12.5 under full boost, 15 under light/no load. Tweak it over and over until your A/F is consistant through the RPM range.


- white_2kgt - 08-30-2005

PDenbigh Wrote:Then, look for an A/F of 11-12.5 under full boost,

and while under 'full boost' make sure you look out for cops coming in the other direction...


- Evan - 08-30-2005

maengs mom is good at tuning your megasquirt


- ScottyB - 08-31-2005

Evan Wrote:maengs mom is good at tuning your megasquirt

yeah it beats messing with her wideband


- PDenbigh - 08-31-2005

white_2kgt Wrote:
PDenbigh Wrote:Then, look for an A/F of 11-12.5 under full boost,

and while under 'full boost' make sure you look out for cops coming in the other direction...

Lol, yeah...


- JustinG - 08-31-2005

sorry guys email notification apparently isnt working, had no clue this many replies had gone down. If anyone would be willing on sacrificing some time to help me out a lil with this i would be very appreciative. i know what i need to do its just that i need a lil guidance :wink: Thanks.