+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Madison Motorsports (https://forum.mmsports.org/forumdisplay.php?fid=3)
+--- Forum: Lounge (https://forum.mmsports.org/forumdisplay.php?fid=6)
+--- Thread: Motor let go in the GS-T (/showthread.php?tid=2368)
Pages:
1
2
Motor let go in the GS-T - KPWSerpiente - 06-09-2005
Number 4 piston kissed number 4 spark plug.
Had done one WOT pull 5 minutes before this happened. Was cruising when I heard some noise...shut it off and pulled over. This was the first plug we pulled and told me exactly why the car wouldn't start and why the motor would not turn by hand.
So I guess it is rebuild time. I have no money...so I'll either get a new job close to where I live so I can walk there and save...or tomorrow I'm a run by the financing options with my parents and how generous they are feeling.
I know a lot of you guys have had an engine let go or become damaged in some other catastrophic way....you can laugh a few times at me now.
-T
*edit: I really need to get this picture of the plug hosted elsewhere.
The original theory is that the rod and crank are not friends anymore...but it is more likely that the massive visible damage to the top of the piston and to the plug were cause by big time detonation. Funny it let go while I was cruising.
-T
- Ryan T - 06-09-2005
- ViPER1313 - 06-09-2005
And boost claims yet another victim.....
- BLINGMW - 06-09-2005
damn! Pic's not working for me, but I can imagine. Sorry dude.
- ScottyB - 06-09-2005
sorry to hear about that T. talk to Rex, see if he can't find you a metro to drive around for a while.
can you tell if there was any scarring on the cylinder wall, or was it only the piston top and plug that took the beating?
- Mike - 06-09-2005
bummer. gsx drivetrain time?
send the pic to me, i'll host it.
- Myuki - 06-09-2005
wow, sorry to hear that man. If you need the pic hosted, i can do it.
- Ginger - 06-09-2005
Sorry dude - good luck with the recovery.
- KPWSerpiente - 06-09-2005
Well I my mom has told me twice now that she has no interest in loaning me the money for a rebuild. I'm not suprised...I knew when I bought this car that if anything major happened to it I'd be walking.
So I sent a letter out to slowboy racing. They build all sorts of 4g63 and 4g64's. I asked about financing a stock 2g head and their stage one block...ross 8.5:1 pistons, 1st generation rods, clevite bearings and arp hardware.
If they get back to me with a decent monthly payment plan I'll be placing that order.
I just don't have the time or space in alexandria to fuck around with it for too long. Car is outside my boy's house in fairfax and it would just be easier to swap in a new block and head one weekend than to do just about anything else. Won't be the cheapest solution though.
-T
- DierwulfBL - 06-09-2005
dammit...........that really sucks. If you're gonna rebuild, why would you use OEM rods??? Just wondering, i suppose the 1g rods are bulletproof. Forged rods are what's up
- Maengelito - 06-09-2005
sorry T. i agree with the awd upgrade. or go with the buick that rob is selling.
- Sijray21 - 06-09-2005
Maengelito Wrote:sorry T. i agree with the awd upgrade. or go with the buick that rob is selling.
either that or another cheap beater you can get
- Andy - 06-09-2005
sorry travis, that f----- blows. wish you better luck.
too bad AWD conversions can only be done on the spyder models
- Evan - 06-09-2005
arent used 4g63 pretty cheap?
- WRXtranceformed - 06-09-2005
Sorry to hear about that bro =( I'm sure you'll have an even better engine in the near future =)
- KPWSerpiente - 06-09-2005
Quote:too bad AWD conversions can only be done on the spyder models
Wrong.
Quote:arent used 4g63 pretty cheap?
Yes. In fact...I have several free blocks to pick from. Problem is I'd rather take this time to do a full on forged rebuild.
Quote:Sorry to hear about that bro =( I'm sure you'll have an even better engine in the near future =)
Right. I have now decided to go ahead and let the car sit for the next few months. I'll be getting a job closer to home or metroing my ass to the current job. Save for the parts...order a few here and a few there. And then assemble a new bottom end, purchase a brand new 2nd gen head and drop them in.
No it is not the cheapest or the fastest process...but that's how it's going to be. So sometime in October I'd assume...I'll be firing her back up.
-T
- Myuki - 06-09-2005
well, whatever happens, I'll be looking forward to when you fire her back up.
good luck
- KPWSerpiente - 06-09-2005
Fuck that. Now I'm thinking a stroker motor. 2.3 liters of goodness.
I need serious help.
-T
- PDenbigh - 06-10-2005
Yes, 2.3 liters are quite fun :-)
- Feersty - 06-10-2005
Sorry bout that Travis, if you want my car for cheap you can have it.