The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.2.30 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Madison Motorsports
Headlight haze - Printable Version

+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Appearance/Cosmetic (https://forum.mmsports.org/forumdisplay.php?fid=14)
+--- Thread: Headlight haze (/showthread.php?tid=1325)

Pages: 1 2

Headlight haze - Andy - 11-12-2004

Here's something new I found out, Eagle One NeverDull Metal Polish is great at getting out the yellow haze common on plastic headlights. My headlights are so purty now.

- ScottyB - 11-12-2004

aw man thats awesome....my fam's minivan's headlights look like ass, and they barely put out any light anymore. i'll have to try that

- Mike - 11-12-2004

Scotty, what minivan is that? A Dodge/Chrysler? Their headlights (all of D/C) are known to be awful... They even fail inspection they get so bad...

- ScottyB - 11-12-2004

MichaelJComputer Wrote:Scotty, what minivan is that? A Dodge/Chrysler? Their headlights (all of D/C) are known to be awful... They even fail inspection they get so bad...

right on....'96 grand caravan. looks like someone smeared yellow grease on them or something. we've tried putting silverstar bulbs in them with zero improvement.....ah how i hate that POS

- ViPER1313 - 11-12-2004

It will come back much worse in about a month. The metal polish takes away the protective UV coating on the plastic. Also, if bird crap gets on the lights after you do this it etches the plastic. Been there, done that Cry . If you still feel like doing this, 1500 grit sandpaper works better than metal polish. Just wetsand the lights and wax them afterwards.

- deeseetoo - 11-17-2004

ViPER1313 Wrote:It will come back much worse in about a month. The metal polish takes away the protective UV coating on the plastic. Also, if bird crap gets on the lights after you do this it etches the plastic. Been there, done that Cry . If you still feel like doing this, 1500 grit sandpaper works better than metal polish. Just wetsand the lights and wax them afterwards.

interesting, could you put a layer of wax on them to prevent this?

- ViPER1313 - 11-17-2004

deeseetoo Wrote:
ViPER1313 Wrote:It will come back much worse in about a month. The metal polish takes away the protective UV coating on the plastic. Also, if bird crap gets on the lights after you do this it etches the plastic. Been there, done that Cry . If you still feel like doing this, 1500 grit sandpaper works better than metal polish. Just wetsand the lights and wax them afterwards.

interesting, could you put a layer of wax on them to prevent this?

I did wax them after the wet sand - wax doesn't block UV rays Cry .

- WRXtranceformed - 11-22-2004

Some wax does block UV rays I think, look around and see.

Has anyone tried that Flitz stuff ? I've seen the commercials for it on TV usually during the Powerblock on Spike TV (best few hours of television ever btw). That stuff is supposed to restore metal and plastic pretty well.

- Andy - 11-29-2004

that flitz stuff does look pretty interesting though wetsanding is the best way to go. Unfortunately, it's a pain in the nuts. I have to drop the bumper to get my headlights free. The UV coating is already gone if they're yellowing so I'm just going to keep using the metal polish until it gets real bad, then I'll pull the headlights, wetsand and spray it.

- Ryan T - 12-28-2004

wetsand with 1500-2000 grit sandpaper then use NOVUS glass polish, works wonders from what I've been told.

- NTIman - 12-28-2004

I used mothers metal polish on mine, followed by wax,looked good for a week, then i gave up. Maybe i should try the sandpaper.

- Ryan T - 01-05-2005

Some guys at a local shop said to use paint thinner. I didn't really know what to think of that, but they said it works.

- Sijray21 - 01-05-2005

Ryan T Wrote:Some guys at a local shop said to use paint thinner. I didn't really know what to think of that, but they said it works.

till you get a little on your bumper...

- .RJ - 01-05-2005

could remove the headlight housings Wink

- Sijray21 - 01-05-2005

.RJ Wrote:could remove the headlight housings Wink

what kind of challenge would that be then... :roll: Tongue

- Ryan T - 01-05-2005

I already have two spare headlights in the basement that I could try it on.

- ViPER1313 - 01-06-2005

Ryan T Wrote:Some guys at a local shop said to use paint thinner. I didn't really know what to think of that, but they said it works.

Don't ever put paint thinner on clear plastic. It etches the living shit out of it and makes it look opaque and hazy. I wouldn't do that in a thousand years. Find a small piece of clear plastic and try it for yourself.

- Nick325is - 01-21-2005

Ryan we will try the 1500 grit sand paper and the scratch remover soon.


Nick

- Feersty - 01-21-2005

I also wanna see DIY black Supra headlight housing.

- Ryan T - 01-21-2005

I'd just take the headlight apart (requires baking it) and remove the lens from the housing and paint it black with some high temp paint.