The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.2.30 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Madison Motorsports
2007 SV650: Project better late than never - Printable Version

+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: 2007 SV650: Project better late than never (/showthread.php?tid=11560)

Pages: 1 2 3 4 5 6 7 8 9

2007 SV650: Project better late than never - Senor_Taylor - 02-19-2019

Neat. So one cylinder is pointed straight up at the gas tank?

Sent from my Pixel 3 XL using Tapatalk

RE: 2007 SV650: Project better late than never - V1GiLaNtE - 02-20-2019

(02-19-2019, 05:04 PM)Senor_Taylor Wrote: Neat. So one cylinder is pointed straight up at the gas tank?

Sent from my Pixel 3 XL using Tapatalk

More or less, yup. Pretty common engine design used by a lot of manufacturers. 

[Image: d2d167c5b00eeeeb37503ee6433b5950.jpg]

RE: 2007 SV650: Project better late than never - V1GiLaNtE - 02-22-2019

"New" brakes installed. IDK if I did a shitty job bleeding the old ones or stainless lines make that much of a difference, but the brake lever in VERY firm now. Hardly any squish. I've got them zip-tied up for the next couple of hours to check for leaks, but I'll report back on actual riding feel if/when the weather clears up.

[Image: Vjdb0Ut.jpg]

[Image: B3L8rYf.jpg]

RE: 2007 SV650: Project better late than never - V1GiLaNtE - 02-24-2019

Another bit of progress. Fabbed up a bracket to mount the hall-effect sensor. It picks up magnets I have installed in the rotor and then wired into the factory harness. I'm still banging my head on building a decent bracket for the speedometer. I might take it to a local fab shop and see what they can build.



[Image: YgOcH3m.jpg]

[Image: jsa33xd.jpg]

RE: 2007 SV650: Project better late than never - "running!" - 02-24-2019

Those brakes look solid.

RE: 2007 SV650: Project better late than never - ScottyB - 02-24-2019

i know its completely superficial but i love how blocky the caliper looks. like its honed from a billet. gold + blue is good stuff.

RE: 2007 SV650: Project better late than never - V1GiLaNtE - 03-18-2019

When life gives you warm weather you get off your ass and get to work. Some long overdue maintenance for the SV and a replacement license plate bracket. My last long ride one of the turn signal bracket just simply snapped off due to the rusty old bracket. That was removed and replaced with a nice brandy new one! My brake lights were also intermittent so a new brake light switch was installed in the master cylinder and we're back in business. 

[Image: kOEjF4t.jpg]

On top of that I changed the coolant over to SuperCool since I have no idea when the coolant was changed last. This is also a nice little "You're Welcome" to others on track if my radiator decides to implode. Cleaned and lubed the chain as well as an adjustment in slack and we're good to go!

[Image: d0wr4ja.jpg]

RE: 2007 SV650: Project better late than never - V1GiLaNtE - 06-21-2019

SOLD!

2007 SV650: Project better late than never - Senor_Taylor - 06-21-2019

Woot

Sent from my Pixel 3 XL using Tapatalk