+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Technical Discussion (https://forum.mmsports.org/forumdisplay.php?fid=11)
+--- Thread: Motor #2... in the trash (/showthread.php?tid=5018)
- Dave - 02-10-2007
i never claimed to be close to as fast as you. A worn out suspension and 120 horsepower aren't exactly a winning competition. Now, when the Z is ready, we might get to play :twisted:
- white_2kgt - 02-10-2007
Dave Wrote:i never claimed to be close to as fast as you. A worn out suspension and 120 horsepower aren't exactly a winning competition. Now, when the Z is ready, we might get to play :twisted:
by then I'll have 120 hp and a worn out suspension :roll: :lol:
- Dave - 02-10-2007
zing! :-)
- white_2kgt - 02-10-2007
Dave Wrote:zing! :-)
lol, only reason I brought that up is b/c Kaan was comparing his driving to 'keeping up with us' unless he was in traffic, I still remember that time we were at either VIR or summit and you asked me if I came into the pits at all during the session, I said no, and you said damn and walked away, I said hey, why and you were like, you lapped me fucker.
- .RJ - 02-11-2007
Does it run yet?
- Dave - 02-11-2007
white_2kgt Wrote:that would be the last time we ran together at Summit, IIRC. Don't worry, Pete's carrying on the tradition :-p.Dave Wrote:zing! :-)
lol, only reason I brought that up is b/c Kaan was comparing his driving to 'keeping up with us' unless he was in traffic, I still remember that time we were at either VIR or summit and you asked me if I came into the pits at all during the session, I said no, and you said damn and walked away, I said hey, why and you were like, you lapped me fucker.
- Kaan - 02-11-2007
its spitting fuel from the injectors... i have the O rings... i just was too tired to put them on... almost 1 am friday night, up at 7am and worked until 7pm saturday... i needed sunday for "rest".... tomorrow begins a new day.
- Kaan - 02-22-2007
She runs... and she pulls HARD. Now once i actually hook up the coolant temp sensor on the back of the block, put a gasket between the header and the exhaust, get some fresh gas in it... i'll be off to JE to get it tuned on the dyno!
- ScottyB - 02-22-2007
rock on Kaan. now paint the VC gold and you're set :lol:
- Sijray21 - 02-22-2007
now if we can get that radiator fan to work... :wink:
i want a ride Kaan!
- Kaan - 02-22-2007
ScottyB Wrote:rock on Kaan. now paint the VC gold and you're set :lol:
that was done well before the motor was even assembled.
I didnt hook up the fan switch on the back of the block. The wires wouldnt reach... and i figured they didnt do shit! I guess thats the same reasoning that had the crank 1 tooth off that i could NEVER see
Get her cleaned up, put some good gas in it, and let it eat!
- Kaan - 03-31-2007
Well she ate... I'll figure out how bad it is tomorrow.
- Feersty - 03-31-2007
:?:
- ViPER1313 - 03-31-2007
Battle broken SHO vs. CRX
first one to get their piece moving again wins
- Kaan - 03-31-2007
ViPER1313 Wrote:Battle broken SHO vs. CRX
first one to get their piece moving again wins
i dont know if i'm going to keep it... or work two jobs to get the money to fix it. it only had 2,800 miles on that motor i spent good money on so i dont have the cash laying around right now.
- Mike - 03-31-2007
sorry to hear, kaan. i'd sell, get anything you can for what you have, buy something reliable, and get that motorcycle running.
multiple projects without one reliable mode of transportation is baaaad.
- Kaan - 03-31-2007
Motorcycle will be ready this week
and i'm thinking B16 this time!
- Feersty - 03-31-2007
Was it any fault of JE?
- navin - 03-31-2007
Kaan,
I have some sources for cheap jdm b16's, jdm zc's, jdm SOHC's - drop me a line if you need anything.
- ScottyB - 03-31-2007
sorry to hear that Kaan. do you know what the fault was at this point? and what happened when she let go?
i feel your pain