+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project: Integra Type Dickbutt (/showthread.php?tid=10678)
Re: Project: Integra Type Dickbutt - Apoc - 06-13-2016
I never said it was dead... I was just commenting that Nationals wanted something for nothing.
Re: Project: Integra Type Dickbutt - Kaan - 07-22-2016
So LONG overdue for an update here… some of the facebook peoples will remember these pictures.
Headgasket went boom… so I went with refreshing a used head (bad idea), while I wait for the right parts (time serts, but with weird bolt lengths I’ve had to order several times to get it right) I decided to play with some DIY aero. I’m 99% sure the front splitter is going to rub all over the ground
Anyway… here we go. Lots of heat problems across the honda community lately (plus I like gold) SO… I am foiling my fuel system and my non flexible intake parts. Pimp’n aint easy.
![[Image: Heat%20Tape%20Intake_zpssx2mfjv1.jpg]](http://s883.photobucket.com/user/JMURACN/media/Heat%20Tape%20Intake_zpssx2mfjv1.jpg.html)
![[Image: RDX%20Heat%20Tape%20and%20Manifold_zpshnwf98hz.png]](http://s883.photobucket.com/user/JMURACN/media/RDX%20Heat%20Tape%20and%20Manifold_zpshnwf98hz.png.html)
Advantage wife… it helps being tiny.
![[Image: No%20Header%20and%20Tiny%20people_zpsbbhfxcmx.jpg]](http://s883.photobucket.com/user/JMURACN/media/No%20Header%20and%20Tiny%20people_zpsbbhfxcmx.jpg.html)
I didn’t know this…but the used head I got to help speed up the process slowed me down. 3 of the cam bolts were stripped… so I ordered a time sert kit… the bolts that stripped are two different bolt sizes (lengths) AND in 3 different casting areas on the head. So that means I had to place 3 different time sert orders (I’m new to this crap anyway). Its still not done… probably tomorrow or Sunday I’ll get it done… I’m pretty sure I’m going to screw it up so I’m stalling.
![[Image: Stripped%20bolt%20stoppage_zpsuibovvfr.jpg]](http://s883.photobucket.com/user/JMURACN/media/Stripped%20bolt%20stoppage_zpsuibovvfr.jpg.html)
Setting things up to add aero. Basically a front splitter (I <3 front traction) and a rear wing (I need to carry more speed in the fast corners)… I got my hands on an old RTR wing from HPM and started laying it all out. On the hatch, to the base plates, to the uprights (I need a TIG welder)… I’ll know more after the welding, but I’m only deflected 1/32nd of an inch (measured with a plum bob)… I’ll count that as a win.
![[Image: WTB%20TIG%20welder_zpscy8xnhyn.jpg]](http://s883.photobucket.com/user/JMURACN/media/WTB%20TIG%20welder_zpscy8xnhyn.jpg.html)
Yes I know its upside down….
![[Image: RTR%20Wing%202_zpsc66nuq9h.jpg]](http://s883.photobucket.com/user/JMURACN/media/RTR%20Wing%202_zpsc66nuq9h.jpg.html)
I’m 99% sure this is going to get rubbed off with all my body roll (burn visa on shocks that can take more spring rate… one day)
![[Image: Lowes%20Splitter_zpseqvtiins.jpg]](http://s883.photobucket.com/user/JMURACN/media/Lowes%20Splitter_zpseqvtiins.jpg.html)
It looks like a lot of lip….
![[Image: Splitter%20in%20place_zps2ipbur5s.jpg]](http://s883.photobucket.com/user/JMURACN/media/Splitter%20in%20place_zps2ipbur5s.jpg.html)
And then you put the lip in there to fill the gap…
![[Image: Not%20much%20lip%20left_zpsd87iph4y.jpg]](http://s883.photobucket.com/user/JMURACN/media/Not%20much%20lip%20left_zpsd87iph4y.jpg.html)
I still want to build the radiator ducting… hopefully it only takes one full day… i wish I still had access to my old sheet metal shop. It would make life SO much easier. Tongs and pop rivets will have to do… and my tailgate has been an “okay” lay out table
Re: Project: Integra Type Dickbutt - CaptainHenreh - 07-22-2016
I love me some organic composite aero. Green AF.
Re: Project: Integra Type Dickbutt - Kaan - 07-22-2016
i'm thinking UG for the wood and the wing
Re: Project: Integra Type Dickbutt - ScottyB - 07-22-2016
are you going to need to run cables from the splitter to the bumper beam to keep it from deforming? i have no idea how much downforce that could make but i always see those stabilizing cables in those situations.
Re: Project: Integra Type Dickbutt - Kaan - 07-22-2016
i dont think the lip will make enough downforce to need it. the rules say it cant be larger than the front bumper when viewed from above. and with that "gap filler" there isnt a ton of high pressure zone. if i need it, i'll add it... but i've got the whole front end basically on quick disconnect. cables would slow me down
Re: Project: Integra Type Dickbutt - Senor_Taylor - 07-22-2016
I'd be more concerned with it ripping off and going bananas on the underside of your car at speed.
Re: Project: Integra Type Dickbutt - .RJ - 07-22-2016
Senor_Taylor Wrote:I'd be more concerned with it ripping off and going bananas on the underside of your car at speed.
You want them to rip off before causing damage to whatever its bolted to.
Re: Project: Integra Type Dickbutt - Senor_Taylor - 07-22-2016
.RJ Wrote:Senor_Taylor Wrote:I'd be more concerned with it ripping off and going bananas on the underside of your car at speed.
You want them to rip off before causing damage to whatever its bolted to.
That makes sense, but I was talking about ripping off under normal load. Maybe I'm just assuming there are more forces acting upon it than there really will be.
Re: Project: Integra Type Dickbutt - Kaan - 07-22-2016
6 elevator bolts (small) in pine board with aluminum mounts. Going off track is going to mess up my splitter but not my car.
Re: Project: Integra Type Dickbutt - rherold9 - 07-22-2016
Chassis mount it to your crash bar. No balls
Sent from my SM-T713 using Tapatalk
Re: Project: Integra Type Dickbutt - navin - 07-26-2016
Kaan Wrote:I still want to build the radiator ducting… hopefully it only takes one full day…
Don't bother if you want to keep it HC legal. Just talked with the big boss mang about it since I wanted to seal off the gaps on the sides of the radiator, but was told "no-go".
Re: Project: Integra Type Dickbutt - rherold9 - 07-28-2016
Are you thinking of painting the wood with some fire retardant material just to be safe?
Re: Project: Integra Type Dickbutt - Kaan - 08-01-2016
navin Wrote:Kaan Wrote:I still want to build the radiator ducting… hopefully it only takes one full day…
Don't bother if you want to keep it HC legal. Just talked with the big boss mang about it since I wanted to seal off the gaps on the sides of the radiator, but was told "no-go".
well crap... i guess i didnt pay too much for that aluminum. at least i can scratch it off my list lol.
rherold9 Wrote:Are you thinking of painting the wood with some fire retardant material just to be safe?
I'm going to cut out around the wrapped header and i might put some reflective stuff on the wood. i'm pretty sure i'll be okay.
Re: Project: Integra Type Dickbutt - Kaan - 08-01-2016
For those of you not on the facebooks and to memorialize this a bit... B20B backup motor. all the "extra" parts from the B18B transfer over... easy and super cheap mode...
![[Image: B20%20Challenge_zpsm1o6d5ct.jpg]](http://s883.photobucket.com/user/JMURACN/media/B20%20Challenge_zpsm1o6d5ct.jpg.html)
I have some major cleaning up to do in the garage. Between the motorcycle, car, and the house… all these projects keep stacking up. After cleaning up as much as I could, I had a revelation… “if you finish your damn projects, stuff wouldn’t be all of the place.”
I was tried of walking around my retired Real Time Racing HPM wing. It needed new endplates (I kept the stockers) and it needed mounts (the RTR mounts are so short they might as well not do anything). So I set out to finish my mounts. The height is set about 2 inches below the roof line and event with the back hatch… but i was drinking when i did my measurements, but it looks high enough. My MIT nerd friends havent jumped in and cursed me... DJ hasnt said anything... so it might actually work
![[Image: REdneck%20Engineering%202_zps1nscdea4.jpg]](http://s883.photobucket.com/user/JMURACN/media/REdneck%20Engineering%202_zps1nscdea4.jpg.html)
![[Image: Redneck%20Engineering%201_zpsqkuxaye0.jpg]](http://s883.photobucket.com/user/JMURACN/media/Redneck%20Engineering%201_zpsqkuxaye0.jpg.html)
![[Image: Redneck%20Engineering%203_zpslv22ow4j.jpg]](http://s883.photobucket.com/user/JMURACN/media/Redneck%20Engineering%203_zpslv22ow4j.jpg.html)
Re: Project: Integra Type Dickbutt - rherold9 - 08-01-2016
A wing is pointless on fwd...
Sent from my SM-G900V using Tapatalk
Re: Project: Integra Type Dickbutt - ScottyB - 08-01-2016
rherold9 Wrote:A wing is pointless on fwd...
been a while since i've seen some confident trolling around these parts
Re: Project: Integra Type Dickbutt - Kaan - 08-01-2016
ScottyB Wrote:rherold9 Wrote:A wing is pointless on fwd...
been a while since i've seen some confident trolling around these parts
BUSTED!
Re: Project: Integra Type Dickbutt - rherold9 - 08-01-2016
ScottyB Wrote:rherold9 Wrote:A wing is pointless on fwd...
been a while since i've seen some confident trolling around these parts
![[Image: morgan-freeman.gif]](http://1.bp.blogspot.com/-p-1BtfWabAg/UX2ZDZlrxMI/AAAAAAAALfw/y-aOmnRHHUk/w1200-h630-p-nu/morgan-freeman.gif)
Re: Project: Integra Type Dickbutt - CaptainHenreh - 08-01-2016
ScottyB Wrote:rherold9 Wrote:A wing is pointless on fwd...
been a while since i've seen some confident trolling around these parts
![[Image: 1zi4Fcj.gif]](http://i.imgur.com/1zi4Fcj.gif)