+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project Hatch (/showthread.php?tid=3782)
Re: Project Hatch - JustinG - 07-15-2011
Mike Wrote:the paint is definitely pretty good for being 19 years old. the car hasn't been washed in... an f'ing long time. some elbow grease should bring it back pretty well.
Yea my biggest concern was the clear coat was gone.....but it was never there in the first place
Re: Project Hatch - CaptainHenreh - 07-15-2011
NO.
NONONONO.
You have a honda now. There is only one color for a honda, especially one that will see the track:
![[Image: 386405623.jpg]](http://pic80.picturetrail.com/VOL852/4445312/19804757/386405623.jpg)
Re: Project Hatch - D_Eclipse9916 - 07-15-2011
navin Wrote:I thought the paint looked decent on Mikey's carhrug:
DJ - VIR in July in the hatch, eff that noise. Too hot/far for a car with no AC. If you are offering free tows, then I'm game
Pussy! (says the guy who will be wearing a coolsuit, and driving there and back in a truck with a/c :lol: )
Re: Project Hatch - JustinG - 07-15-2011
CaptainHenreh Wrote:NO.
NONONONO.
You have a honda now. There is only one color for a honda, especially one that will see the track:
MMMMMMMM yes pwease
Pretty sure goodspeed just splooged all over his computer at OG
Re: Project Hatch - JustinG - 07-15-2011
OOOOOOhhhhhhh RRRRRRR JJJJJJJJJ....
Did you run any kind of rear subframe reinforcements due to your rear sway bar? I hear with the integra and Civics the sway bar mounts like to tear out with a sway bar bigger than 22mm????
Re: Project Hatch - Mike - 07-15-2011
yes, pick up an asr subframe brace.
Re: Project Hatch - JustinG - 07-15-2011
Bah....thats mucho dinero hmmmmmm
Re: Project Hatch - navin - 07-15-2011
yikes, that shit is expansiv'
I've been using beaks, no tear-outs yet: <!-- m --><a class="postlink" href="http://www.beaksproducts.com/Products.htm">http://www.beaksproducts.com/Products.htm</a><!-- m -->
Re: Project Hatch - JustinG - 07-15-2011
yea i was thinking of just the beaks reinforcement kit instead of the full brace, but wasn't sure how legit that was....
Re: Project Hatch - Mike - 07-15-2011
beaks is fine. asr is ballin'. i thought you were too.
Re: Project Hatch - JustinG - 07-15-2011
Must be, picking up an asr rear sub frame brace and itr sway sunday, used.
Re: Project Hatch - Mike - 07-15-2011
good work. the bling is strong with you.
Re: Project Hatch - JustinG - 07-15-2011
Was one hell of a deal.....I'm surprised myself.
Re: Project Hatch - JustinG - 07-17-2011
picked this ASR Subframe brace and ITR rear sway (22mm) up today. Got one hell of a deal if I do say so my self.....
Need to find a front sway now
![[Image: 2011-07-17_19-26-24_375.jpg]](https://lh4.googleusercontent.com/-gPlaIs29pJA/TiN0HS9T8eI/AAAAAAAABdk/a78qn5mhGoY/s640/2011-07-17_19-26-24_375.jpg)
Re: Project Hatch - navin - 07-17-2011
<!-- w --><a class="postlink" href="http://www.importautosalvage.com">www.importautosalvage.com</a><!-- w -->
That's who I used to go through.
Re: Project Hatch - JustinG - 07-18-2011
So list of things to do this week/weekend.....
Remove driver seat (EVO being sold to DJ)
Grind off driver side sliders salvaging the base bracket
Order Sparco Steel Sidemounts for Driver side
Install Driver side EVO 2 Plus
Install ASR subframe brace, ITR Rear Sway
Coilovers will arrive friday, Install and check front pass shock.
Wrap DC header with exhaust wrap
Install DC Header included from Mikey
Install Skunk2/BLOX Intake Manifold included from Mikey
Pull VC, new coat of paint, its chipping (RICER) and change VC Gasket
Install Oil Temp and Oil Pressure gauges including sandwich adapter for gauge sensors.
Change Oil
Install Stock steering wheel
Pray she passes inspection
DRIVE DA SUM BITCH
Re: Project Hatch - D_Eclipse9916 - 07-18-2011
JustinG Wrote:So list of things to do this week/weekend.....
Remove driver seat (EVO being sold to DJ)
Grind off driver side sliders salvaging the base bracket
Order Sparco Steel Sidemounts for Driver side
Install Driver side EVO 2 Plus
Install ASR subframe brace, ITR Rear Sway
Coilovers will arrive friday, Install and check front pass shock.
Wrap DC header with exhaust wrap
Install DC Header included from Mikey
Install Skunk2/BLOX Intake Manifold included from Mikey
Pull VC, new coat of paint, its chipping (RICER) and change VC Gasket
Install Oil Temp and Oil Pressure gauges including sandwich adapter for gauge sensors.
Change Oil
Install Stock steering wheel
Pray she passes inspection
:thumbup:
JustinG Wrote:DRIVE DA SUM BITCH
I call BS :bootyshake:
Re: Project Hatch - V1GiLaNtE - 07-18-2011
Hit me up if you need a hand......
.
.
.
.
..
...
....
To hold brewski's... Jk. Harbor freight this week? Grabbed mah d-ring,strap, and angle grinder.. but could still use some moh jack stands..
Re: Project Hatch - Mike - 07-18-2011
JustinG Wrote:Grind off driver side sliders salvaging the base bracket
sadface. that's a custom job by piper for rj. i know it wasn't originally cheap. think about selling it and going sparco fixed?
Re: Project Hatch - JustinG - 07-18-2011
id love to sell it, would make my life a hell of alot easier, been posted for a few weeks at just enough money to cover a new bracket and sidemounts. No bites, honda guys are cheaper than DSM guys apparently, posted on HT and VAdriven with no bites at all. Although its not advertised as Custom welded by piper motorsports.
Just isn't wide enough to fit my fat boy seat, although i do fit in the EVO now that I have lost weight, but i already promised it to DJ.