+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project Hatch (/showthread.php?tid=3782)
Re: Project Hatch - JustinG - 07-05-2011
will be in the mail tomorrow via priority mail, work for you?
Re: Project Hatch - WRXtranceformed - 07-05-2011
JustinG Wrote:will be in the mail tomorrow via priority mail, work for you?Shit buyer!! Beware seller! :mrgreen:
Re: Project Hatch - JustinG - 07-05-2011
My cousin from yugoslavia will send you a check via western union for half and I will send you the rest when I get back into the country.
Re: Project Hatch - Mike - 07-05-2011
only if he's a prince. let me know if you need my bank account and credit card numbers. slow mail is cool.
Re: Project Hatch - JustinG - 07-06-2011
Epic Fail, just got an email from Lynn Combs (BRR SCCA Guy), who was selling the 6ULs. Apparently he just received an email saying there is a recall on the wheels, and he has to check the serial # to be sure these don't fall under the recall. Fingers crossed!
Re: Project Hatch - navin - 07-06-2011
WUT DUH!
I emailed that guy (well had someone from that board get in touch with him) and he said he was no longer selling the 6UL's!
Re: Project Hatch - JustinG - 07-06-2011
interesting, maybe he was just jerking me around, when did you email him? I got in touch with him on Monday.
Re: Project Hatch - navin - 07-06-2011
Last week I believe -
hrug:
Re: Project Hatch - JustinG - 07-06-2011
so I guess ill keep looking for 15x8 4x100 +36mm wheels.......
Re: Project Hatch - navin - 07-06-2011
Maybe he had a change of heart, id keep on it. For the price, they are a steal.
Re: Project Hatch - JustinG - 07-06-2011
yea i told him i was still interested even if he sent them back and got brandy new ones.
Re: Project Hatch - JustinG - 07-07-2011
So thoughts on this, or am I just trying to hard.....
15x8 TRM C1M (for Miata) +30 offset with Miata hub bore, machined 2mm to fit the EG.
![[Image: 198065_1636417237404_1445922183_31299397_4840386_n.jpg]](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/198065_1636417237404_1445922183_31299397_4840386_n.jpg)
15x8 TRM C1 +20 offset, had to raise the rear a bit and his fenders are rolled.
![[Image: 1c5f757b.jpg]](http://i39.photobucket.com/albums/e182/crixzc/1c5f757b.jpg)
I really really dont want to spend $159 a wheel then mount and balance costs for the 6ULs, so these 2 are options in a 15x8 at $99 per wheel free mount and balance, or just do a 15x7 or 7,5 +42 for $89/$99 free mount and balance. Can always look into Rota Slips.....
Its really hard to find a 15x8 in the right offset that isnt insanely over priced.
Re: Project Hatch - .RJ - 07-07-2011
Just do 15x7.5. You dont need 8" wide wheels.
Re: Project Hatch - JustinG - 07-07-2011
will I be ok with the +42mm or should I run like 6mm spacers?
Re: Project Hatch - .RJ - 07-07-2011
No idea on that one. Mikey, Kaan.... ?
Re: Project Hatch - Mike - 07-07-2011
no idear. been out too long. don't do whatever that person above did. too much effort for too little gain (if any).
Re: Project Hatch - Kaan - 07-07-2011
EGs have a ton more room in the wheel wells... 42s might work without spacers.
Re: Project Hatch - JustinG - 07-07-2011
after searching for about an hour on HT, seems as though they should be fine. Even saw some posts from the good ole R to the J in my searches
So im just gonna order those bad boys and pending how much I like the color, only color they come in is light gray, they may be spray bombed black or UG for old times sake.
Re: Project Hatch - Scott - 07-07-2011
JustinG Wrote:interesting, maybe he was just jerking me around, when did you email him? I got in touch with him on Monday.
He's a good guy, wouldn't jerk you around (head of BRR-SCCA autocross)
Re: Project Hatch - JustinG - 07-07-2011
15x7.5s ordered, with star specs, on back order til the 18th.