+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Madison Motorsports (https://forum.mmsports.org/forumdisplay.php?fid=3)
+--- Forum: Lounge (https://forum.mmsports.org/forumdisplay.php?fid=6)
+--- Thread: Lee's Watch Thread for MM'ers of Impeccable Taste (/showthread.php?tid=11333)
Lee's Watch Thread for MM'ers of Impeccable Taste - rherold9 - 01-05-2018
Better than expected for a free watch
![[Image: 64ee51f6ed198740198f257ede9d6df4.jpg]](https://uploads.tapatalk-cdn.com/20180105/64ee51f6ed198740198f257ede9d6df4.jpg)
Sent from my Pixel using Tapatalk
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - JPolen01 - 01-05-2018
I know that watch was free which is why all of you got it. But holy shit that marble looking face is one of the ugliest things I have ever seen.
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - Ken - 01-05-2018
(01-05-2018, 08:40 AM)JPolen01 Wrote: I know that watch was free which is why all of you got it. But holy shit that marble looking face is one of the ugliest things I have ever seen.
I would constantly think the glass is broken.
Lee's Watch Thread for MM'ers of Impeccable Taste - rherold9 - 01-05-2018
I don't think it's bad but then again I have shitty taste so :dunno:
Sent from my Pixel using Tapatalk
Lee's Watch Thread for MM'ers of Impeccable Taste - Sully - 01-15-2018
I don't think it warrants a new thread and this one has been slightly dormant lately so wondering if I can hi-jack it for a few pages and see what everyone is rocking for wedding bands since this is kind of a jewelry thread.
I'm currently thinking the embr red sandalwood ring but I'm super indecisive because there are so many wedding bands that are all so similar. I have small hands and they make a 6mm width which I think would better than the 8mm that is pictured. I know there are a few recently married as well as soon to be and then the long timers so just curious what everyone else has done or is thinking of doing.
Sent from my VK810 4G using Tapatalk
![[Image: 369f86675efc8cae956d5470aff57200.jpg]](https://uploads.tapatalk-cdn.com/20180116/369f86675efc8cae956d5470aff57200.jpg)
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - WRXtranceformed - 01-15-2018
QALO or generic equivalent
I have a few cheap tungsten rings I picked up on Amazon and they're fine ($8-10...but literally exactly the same as the ones jewelry stores try to charge $300+ for) but they are so hard they scratch the crap out of everything they touch including my watches. After putting a nice dinger in the caseback of the Rolly with one the other day, they have been relegated back to the jewelry box and I only wear my black QALO
Oh and I should have an update in a few weeks on Project "Two Tone"
In the meantime, my pocket watch is on the block! I don't know that anyone here would be interested, but take a look anyway if you're bored!
https://www.reddit.com/r/Watchexchange/comments/7qfgyk/wts_1920s_elgin_father_time_14k_gold_filled/
![[Image: M2NTGyv.jpg]](https://i.imgur.com/M2NTGyv.jpg)
![[Image: kdKg6ms.jpg]](https://i.imgur.com/kdKg6ms.jpg)
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - CaptainHenreh - 01-16-2018
(01-15-2018, 11:22 PM)WRXtranceformed Wrote: QALO or generic equivalentSame except I don't wear frufru timepieces so I just rock a tungsten unit from Amazon and I see no reason why you shouldn't.
I have a few cheap tungsten rings I picked up on Amazon and they're fine ($8-10...but literally exactly the same as the ones jewelry stores try to charge $300+ for) but they are so hard they scratch the crap out of everything they touch including my watches.
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - JPolen01 - 01-16-2018
I think mine is Tungsten as well. It's scratched to hell, but I literally never take it off except for when I am at the gym.
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - WRXtranceformed - 01-16-2018
I really don't like wearing a ring so I don't wear them unless I leave the house
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - Ryan T - 01-16-2018
I've got a Tungsten one I wear on dressy occasions, otherwise I've got a couple silicone rings I go between.
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - davej - 01-16-2018
Going on 15+ years with a platinum ring I had made while working at a jewelry store. It is nicked and scratched up, and has been squished out of round a few times (but goes back into shape) all part of the character to me.
Lee's Watch Thread for MM'ers of Impeccable Taste - ViPER1313 - 01-16-2018
(01-16-2018, 09:34 AM)JPolen01 Wrote: I think mine is Tungsten as well. It's scratched to hell, but I literally never take it off except for when I am at the gym.
That really shouldn’t be the case with Tungsten. Mine has 0 scratches after wearing it for 4 years straight.
The 2 downsides of Tungsten rings are they are heavy (if you care about that) and you run the risk of doctors not being able to cut the ring off of you if you mangle your hand in an accident because of the hardness of the metal.
![[Image: d3ddf8e42677cec45bc98bc053e43f6e.jpg]](https://uploads.tapatalk-cdn.com/20180116/d3ddf8e42677cec45bc98bc053e43f6e.jpg)
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - JPolen01 - 01-16-2018
hmmm maybe mine is white gold then. That would make more sense in regards to the scratches.
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - WRXtranceformed - 01-16-2018
(01-16-2018, 10:55 AM)ViPER1313 Wrote: The 2 downsides of Tungsten rings are they are heavy (if you care about that) and you run the risk of doctors not being able to cut the ring off of you if you mangle your hand in an accident because of the hardness of the metal.
This was another reason I switched to silicone for the most part. Google images of "degloving" and it will scar you a bit from wearing tungsten haha
Lee's Watch Thread for MM'ers of Impeccable Taste - ViPER1313 - 01-16-2018
I just googled removing a Tungsten ring out of curiosity. It seems you can crack them off. It may not be as big of a deal as people make it out to be.
https://www.larsonjewelers.com/t-Can-Tungsten-Rings-be-cutoff.aspx
Lee's Watch Thread for MM'ers of Impeccable Taste - JustinG - 01-16-2018
Brother is a Firefighter in FFX, don't buy Tungsten. I like having 10 fingers.
I have a Qalo and an Amazon special.
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - CaptainHenreh - 01-16-2018
(01-16-2018, 11:02 AM)WRXtranceformed Wrote:(01-16-2018, 10:55 AM)ViPER1313 Wrote: The 2 downsides of Tungsten rings are they are heavy (if you care about that) and you run the risk of doctors not being able to cut the ring off of you if you mangle your hand in an accident because of the hardness of the metal.
This was another reason I switched to silicone for the most part. Google images of "degloving" and it will scar you a bit from wearing tungsten haha
you think a gold ring won't deglove your finger?
I mean yeah. If you're in a profession/circumstance where you work with machines or something, maybe don't wear a metal ring (or a ring at all) but I work at a computer screen, and I take my jewelry off when I operate power tools. Risk mitigated.
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - WRXtranceformed - 01-16-2018
(01-16-2018, 11:43 AM)CaptainHenreh Wrote:(01-16-2018, 11:02 AM)WRXtranceformed Wrote:(01-16-2018, 10:55 AM)ViPER1313 Wrote: The 2 downsides of Tungsten rings are they are heavy (if you care about that) and you run the risk of doctors not being able to cut the ring off of you if you mangle your hand in an accident because of the hardness of the metal.
This was another reason I switched to silicone for the most part. Google images of "degloving" and it will scar you a bit from wearing tungsten haha
you think a gold ring won't deglove your finger?
I mean yeah. If you're in a profession/circumstance where you work with machines or something, maybe don't wear a metal ring (or a ring at all) but I work at a computer screen, and I take my jewelry off when I operate power tools. Risk mitigated.
Ha yeah I wasn't saying that tungsten was the only one that could do it, but even stuff like car accidents could put you at risk with a metal ring. Plus I personally find the silicone rings a million times more comfortable and lighter to wear. I was starting to see the chrome on my truck door handle and the paint on the exterior handle was getting scratched up from my tungsten rings. And since we are in the watch thread, they were scratching the crap out of the casebacks of my watches if I forgot to take the ring off first which you may or may not care about if you have a nicer timepiece
RE: Lee's Watch Thread for MM'ers of Impeccable Taste - D_Eclipse9916 - 01-16-2018
(01-16-2018, 11:22 AM)JustinG Wrote: Brother is a Firefighter in FFX, don't buy Tungsten. I like having 10 fingers.
I have a Qalo and an Amazon special.
Odd in my research Tungsten was one of the better ones to buy.
It is more brittle so a hammer/vice grips should break it off. While Titanium and some of the others need special cutters.
I hate silicone rings with a passion but will use them when working out.
http://www.fresno.ucsf.edu/em/posters/snowdenposter2010.pdf
Lee's Watch Thread for MM'ers of Impeccable Taste - Sully - 01-16-2018
Doesn't seem to matter what you're doing, still seems to be a risk of degloving. Didn't Jimmy Fallon fall in his kitchen and it get caught on a counter or something?
For fuksak, don't Google images of ring avulsion.
I think I'll get a metal ring to wear the day of the wedding and then like when we go out to dinner or something but I'm already not a jewelry fan so maybe I'll figure something else out for everyday or try out a silcone one.
It's weird that men have worn these things for hundreds (maybe thousands idk) of years and now you hear about these freak accidents... Of course now we also have internet so maybe it's always happened
Sent from my SM-G930V using Tapatalk