The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.2.22 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Madison Motorsports
Miata A/C and Cooling issues with questions - Printable Version

+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Technical Discussion (https://forum.mmsports.org/forumdisplay.php?fid=11)
+--- Thread: Miata A/C and Cooling issues with questions (/showthread.php?tid=11703)

Pages: 1 2


RE: Miata A/C and Cooling issues with questions - Scott - 06-05-2018

(05-31-2018, 01:50 PM)Senor_Taylor Wrote: Other Taylor, you're aware of the keyway issues, right?

Sent from my Pixel using Tapatalk

I've seen way more keyway issues on later cars than I have on early 1.6's.....


RE: Miata A/C and Cooling issues with questions - balactm - 06-15-2018

(05-31-2018, 01:50 PM)Senor_Taylor Wrote: Other Taylor, you're aware of the keyway issues, right?

Sent from my Pixel using Tapatalk

I am aware of them. My vin number is a later model 91, so it came with a long nose. That being said, I have discovered in my ownership that the motor is from a different car (93 i believe). So much for Bob and Phyllis' story. When I did the timing belt I COULD NOT get the timing cog off, no matter how I pried, pulled, etc. I wonder if this block has already had the jb weld fix? I don't know, I'm probably going to just get rid of it, and do what I SHOULD have done and buy a newer car that will inherently have less problems.

I've tried 2 crank pulley's now, both show the same issue. I do wonder though...you know when you see  car with muddy sidewalls on a quarter of the tire, and the tire appears to "wobble"? I wonder if the slightly rusty crank pulleys are causing a "wobbly optical illusion." The car runs great other than at idle. I had a similar problem on some of my honda's where the car would stall as your come to a stop after depressing the clutch pedal; fixed it by cleaning the IACV. I haven't done a bunch of research on this, as it's only a minor inconvenience, and I've figured out how to avoid it altogether by changing driving habits (avoiding depressing the clutch in certain rpm ranges as I'm coming to a stop). 

Other than that, it seems fine, especially now that the cooling problem is definitely fixed. Replaced radiator, and IACV hoses, has not overheated once. Now to fix the A/C that is always on (won't cycle off). Stuck clutch? New compressor time? Miscellaneous wiring gremlin from almost 30 year old car?