The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.2.30 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Madison Motorsports
Project 6.0L Sedan - Printable Version

+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project 6.0L Sedan (/showthread.php?tid=10285)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Re: Project 6.0L Sedan - navin - 10-31-2013

No problem -- now don't be a wuss and bring that shit out to Summit... We'll wrap it up Friday night in the paddock (just go by HF and pickup that under the hood work light Wink )

Re: Project 6.0L Sedan - PDenbigh - 10-31-2013

Bring it. We're all project car guys, we don't expect a beauty queen first day out. It'll be a great opportunity to shake it down a bit so you know what needs done over the winter.

Re: Project 6.0L Sedan - D_Eclipse9916 - 10-31-2013

PDenbigh Wrote:Bring it. We're all project car guys, we don't expect a beauty queen first day out.


That it WONT be. Still has the messed up fender, have one coming in next week. I just will keep the hood closed unless I magically find some time to work on it between now and then. Whole front end body panels arent even on the car!

Re: Project 6.0L Sedan - Mike - 10-31-2013

drive it or you're a bitch.

like justin.

Re: Project 6.0L Sedan - navin - 10-31-2013

All Hail V8..!

<!-- m --><a class="postlink" href="http://vimeo.com/78299365">http://vimeo.com/78299365</a><!-- m -->

Re: Project 6.0L Sedan - ScottyB - 10-31-2013

YESSS.

Re: Project 6.0L Sedan - JustinG - 11-01-2013

Mike Wrote:drive it or you're a bitch.

like justin.

Slightly uncalled for, but if it motivates DJ, I'll allow it.

Re: Project 6.0L Sedan - CaptainHenreh - 11-01-2013

JustinG Wrote:
Mike Wrote:drive it or you're a bitch.

like justin.

Slightly uncalled for, but if it motivates DJ, I'll allow it.

Eh, I think mikey has that right. How many times did his Track Slut hit the track with your hands on the wheel?

Re: Project 6.0L Sedan - D_Eclipse9916 - 11-01-2013

Great googly moogly, I can't pull a Justin.

Re: Project 6.0L Sedan - JustinG - 11-01-2013

[Image: hahahaNO.gif]

Re: Project 6.0L Sedan - Mike - 11-01-2013

yep, it's a thing.

Re: Project 6.0L Sedan - D_Eclipse9916 - 11-04-2013

It was... |..| close to getting done. I actually put it on the floor, started it up and went to go throw it in the trailer. Only to find the clutch went straight to the floor. This was at 9:30 at night, and I didn't feel like pissing off my neighbors if I tried to bleed again and then start it at 10 at night. So she didnt come to Summit. I did start it up with it on the ground though and...wow. Needs a muffler, probably two. When it starts, it "barks", and rumbles the whole garage. Was enough to make Mike D'Amico jump and a box fall off the shelves in the garage.

Things left to do.

1. Bleed the clutch more...keep bleeding...bleed some more.
2. Finish up cat-back
3. Since it now has no timeline, I am going to clean up the wiring a bit more. Not a total rewire, but I have to clean up the wiring so it looks stock. Total rewire comes in spring when I put the A/C in.

Re: Project 6.0L Sedan - SlimKlim - 11-04-2013

D_Eclipse9916 Wrote:When it starts, it "barks", and rumbles the whole garage. Was enough to make Mike D'Amico jump and a box fall off the shelves in the garage.

This makes me feel tingly

Re: Project 6.0L Sedan - D_Eclipse9916 - 01-15-2014

Wow, really havent touched this car in 2 months. So Monday I decided to get things moving again. I bled the clutch and with a firm pedal, a running engine, a put together car, I was ready to have some fun the next day.

Get home, open the garage yesterday to this:
[Image: 1017156_10101512552938659_360426473_n.jpg]

The slave cylinder exploded..or something. I dont know yet. Going to attempt to pull the transmission itself tonight, if not, I will be pulling the motor/trans out. Honestly, I would love to pull the engine/trans out again to be able to go through the car now that everything is measured/installed, and just clean it up. If I dont drive it though, I may be tempted to just leave it sitting like I have the past 2 months.

Re: Project 6.0L Sedan - HAULN-SS - 01-15-2014

Heh..when I first looked at that picture I was like "how the hell did that knock the trim piece off?"

Re: Project 6.0L Sedan - .RJ - 01-15-2014

Maybe you have too much travel on the slave and the rod popped out? (giggity)

Re: Project 6.0L Sedan - D_Eclipse9916 - 01-16-2014

So last night tackled pulling JUST the trans out. After 30 minutes of headscratching on how to get this one bolt (which was my concern), we blindly got a socket on it with a deep socket 15mm, 2 3-inch extensions, 1 1-foot extension, 2, 6-inch extensions, a flex head ratchet and one u-joint. Once that was out, it was not really bad at all to pull the trans out just itself.

[Image: 1560533_10101514712625629_1340332765_n.jpg]

After pulling it out, I unbolted the slave and as it tipped over, brake fluid poured out of the slave, from what I assume is the seal between the slave and TOB.
[Image: 1560503_10101514623863509_799116024_n.jpg]

With how mcuh grime there was in there. I have to assume there was a small leak for a while, as the interior of the bellhousing was COVERED in grime/combination of clutch disc dust and brake fluid. F***ing A. Went against my philosophy if something works, dont mess with it.

I then pulled the clutch out to see if any fluid was on it. And although its hard to tell the real wear on the clutch disc (since there are 3 clutch discs in a triple plate), it looks like it has seen better days. I don't know if the material is like brake pads where the edges can crumble and its no biggie or not. Contacting Spec this morning.

[Image: 1530468_10101514623913409_1388614370_n.jpg]
[Image: 1511106_10101514623968299_38287317_n.jpg]
[Image: 1531598_10101514624023189_372762072_n.jpg]
[Image: 156351_10101514624048139_722113994_n.jpg]

Re: Project 6.0L Sedan - davej - 01-16-2014

bet that bolt is going to be fun to try and get back in.
what's a new triple plate clutch disk cost? if that one is on the way out i'd rather you throw a new one in my car now while it's all apart. Big Grin (unless it's like a 2 grand part Cry )

Re: Project 6.0L Sedan - .RJ - 01-16-2014

I dont even understand how those types of slave cylinders work :lol:

Re: Project 6.0L Sedan - SlimKlim - 01-16-2014

I've never even seen a slave cylinder like that, it's all one piece with the TOB?